marquetry easel

Alexandre Morell's Boulle Cartel – Marquetry

Mathieu VathVacuum bonding, Marquetry, Boulle marquetry, furniture restoration
Ebénisterie Mathieu VATH

I reattached the structure, removed the brass, cleaned up the remaining animal glue, and eliminated the traces of superglue and neoprene adhesive. Next came cutting the new pieces of brass and tortoiseshell to fill the gaps. So, as usual, I took an impression of the missing piece. I then glued this paper onto a brass plate, which was itself glued with fish glue to a 4mm plywood base. This made the plate easier to cut. Retrieving the brass piece is simple: […]

Read more

Tool cabinet – End

Mathieu VathCopy of an old, Creation, Marquetry
Ebénisterie Mathieu Vath

And there you have it, it's finished and ready to use. All the tools are in their proper place. All that's left is to find bronze fittings for the handles and keyhole escutcheons. For the finishing technique, I used the same one applied to furniture of that period: polishing. I first scraped the surface, then sanded it with 150-grit sandpaper. Next, I applied Venetian tripoli mixed with olive oil using a piece […]

Read more

Tool cabinet – Continued

Mathieu VathCopy of an old, Creation, Marquetry
Ebénisterie Mathieu Vath

Here are some photos of the marquetry on the tool cabinet. For the corner pieces, I was inspired by those on a table by Pierre Gole, a predecessor and major influence of André-Charles Boulle. For this cabinet, I needed to make 16 corner pieces. So, to save time, I decided to use the Boulle marquetry technique. I made four bundles of different colored woods to obtain four different marquetry designs from a single cut. Therefore, there are four identical designs, but with different flower colors. Then, […]

Read more

Tool cabinet – The sculptor

Mathieu VathCopy of an old, Creation, Marquetry
Mathieu Vath

With this tool cabinet, I wanted to explore and put into practice several avenues I was researching. One of them was to tackle the marquetry technique of a famous 18th-century cabinetmaker, David Roentgen. This "mosaic marquetry" involves cutting a single sheet of veneer using a conical saw. Each piece is then colored by dipping it in a chosen dye. However, there were two difficulties: the conical sawing, which is tricky on 0.6 mm veneer, and the dyeing of the wood. When I make […]

Read more